Traulsen Freezer Repair in San Diego

As background for Traulsen freezer owners, Traulsen freezers are commercial reach-ins and roll-ins with timed or demand defrost designed for frequent door openings.

Look first at defrost heater or timer faults, door gasket and heater faults, evaporator fan motor failure, and condenser fouling; those are where Traulsen freezers tend to give out. Owners typically call us about one of these: coil icing up, freezer warming, and door frost buildup. Heavy ice on a Traulsen freezer coil usually points to a defrost or gasket problem rather than a refrigerant leak. A chest freezer that frosts heavily around the lid is usually telling you the gasket or hinge is not sealing.

Traulsen freezers use defrost systems designed for frequent door openings, and a defrost or gasket fault can cause heavy ice on the coil. These issues are usually repairable without major parts. Regular maintenance prevents most problems.

Commercial freezers in hot kitchens and coastal locations both suffer when the condenser is neglected, and a failing freezer can put a full inventory at risk. We test the thermostat or control, the start components and the defrost circuit, then discuss the compressor only if those pass.

When a Traulsen freezer builds frost quickly, worn door gaskets or a door not closing fully is the likely cause. You approve the price for the evaporator fan motor failure, or whatever the diagnosis finds, before we start the repair.

Check the lid or door gasket each season; a torn seal lets in moisture that turns into frost. Alarm sounding is a repair worth booking sooner rather than later on a Traulsen freezer.