Avanti Washer Repair in San Diego

Here is what we are working with on Avanti washer calls: Avanti sells small portable and compact washers, including twin-tub models, aimed at apartments without laundry hookups.

On these washers, repairs tend to involve drain pump, timer or control board, lid switch, and drive belt or motor. In plain terms, the complaints we hear are not draining, not spinning, and leaking from the base. On a portable Avanti washer that will not drain, make sure the drain hose is lower than the tub and not kinked under the unit. Banging during spin is usually worn suspension rods or shocks, or a load that is out of balance, before it is the bearings.

Portable Avanti washers drain by pump or gravity depending on the model, and many draining problems come from hose height or a kinked hose rather than a failed pump. Twin-tub units have separate wash and spin timers and motors, so one side can fail while the other works. Replacement parts are inexpensive, but the low price of the machine means larger repairs often do not make sense.

Laundry in the garage is common in San Diego tract homes, which means dust, temperature swings and, near the coast, salt air on the washer's cabinet and wiring. We run the machine through fill, wash, drain and spin and watch where it stops; that narrows the fault quickly.

Whether the problem is the lid switch or something less obvious, you get a written estimate before work starts, and the repair carries 90 days on parts and 30 on labor.

Check that the machine is level; an unlevel washer walks, bangs and wears its suspension early. For timer not advancing or any other Avanti washer fault, the visit starts with a diagnosis and a written price.